MRO Aerosol Spray

Beltkote belt dressing is a non-staining, high tack,water resistant, synthetic lubricant cum belt conditioning treatment for improving grippage and preventing belt slippage for all flat, round and v-belts. It improves traction, prevents premature belt wearing off and eliminates belt squeaking or squealing noises. It conditions worn belts, maintains their flexibility and resilience to hardness while reducing slippage, cracking and glazing.

Applications
For use on all round, flat & v-belts in fans, pumps, machines,conveyors, air conditioners, textile machines, compressors, generators in all industrial machinery, conveyor systems,motorised equipment and vehicles.

Directions for Use
Switch off the power and turn off the equipment beforespraying this product. Protective guards or covers may have to be...

Beltkote belt dressing is a non-staining, high tack,water resistant, synthetic lubricant cum belt conditioning treatment for improving grippage and preventing belt slippage for all flat, round and v-belts. It improves traction, prevents premature belt wearing off and eliminates belt squeaking or squealing noises. It conditions worn belts, maintains their flexibility and resilience to hardness while reducing slippage, cracking and glazing.

Applications
For use on all round, flat & v-belts in fans, pumps, machines,conveyors, air conditioners, textile machines, compressors, generators in all industrial machinery, conveyor systems,motorised equipment and vehicles.

Directions for Use
Switch off the power and turn off the equipment beforespraying this product. Protective guards or covers may have to be removed in some instances. In such cases extreme caution must be observed to prevent accidents. Replace guards after application. Spray light, even film onto stationary belts from both the sides and may be applied to pulleys also. Allow few minutes for the solvents to evaporate before restarting the equipment. Reapply occasionally to maintain full power and to optimise belt life.

Caution
Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

Benefits

• Eliminates belt squeaking or squealing noises
• Provides for better operating efficiency
• Prevents hardening, glazing and premature cracking
• Increases life and tensile strength of belts
• Reduces energy loss through effective power transfer
• Maintains flexibility and resilience of belts

Non Flammable, On Line, Electrical Contact Cleaner

CONTACLEAN-L is a non-flammable blend of high purity cleaners designed to clean electrical contacts and switches. Formulated specially for use on sophisticated equipment, this fast drying contact cleaner is non-conductive, does not leave any residue and is non-toxic. It has a very low surface tension and quickly penetrates minute crevices, cracks or pores to clean the surfaces and safely rinses off light oils, dust, fingerprints, silicones, oxides, carbon or moisture. Premium is safe to use on most plastics, metals, rubbers, elastomers & other insulating material and does not contain any CFC’s, chlorinated solvents or any ozone depleting chemicals. Formulated with non flammable, safe, CO2 propellant.

Applications For Use
Contacts, controls, relays, PCB’...

Non Flammable, On Line, Electrical Contact Cleaner

CONTACLEAN-L is a non-flammable blend of high purity cleaners designed to clean electrical contacts and switches. Formulated specially for use on sophisticated equipment, this fast drying contact cleaner is non-conductive, does not leave any residue and is non-toxic. It has a very low surface tension and quickly penetrates minute crevices, cracks or pores to clean the surfaces and safely rinses off light oils, dust, fingerprints, silicones, oxides, carbon or moisture. Premium is safe to use on most plastics, metals, rubbers, elastomers & other insulating material and does not contain any CFC’s, chlorinated solvents or any ozone depleting chemicals. Formulated with non flammable, safe, CO2 propellant.

Applications For Use
Contacts, controls, relays, PCB’s, switches, motors,connectors, generators, ignition systems, terminals, sensors, circuit breakers, plugs & sockets, fuse boxes, transformers, switch gears, bearings, generators, gears, tuners, bush bars, connectors, potentiometers, solenoids, capacitors, communication equipment, oxygen systems, electrical equipment, electronic equipment, aviation equipment, industrial equipment.

Directions
For Use Spray liberally on the surface to be cleaned till the cleaning agent runs off as clear. Use extension tube for hard to reach areas. Use an abrasive or brush to clean heavy oxides or other deposits. Spray starting at the top and finishing at the bottom. Test on plastics by using on a small area before use.

Benefits

• Fast penetrating and rapidly evaporating non-flammable high purity cleaner suitable for ‘on-line’ cleaning applications
• Low surface tension and superior wetting abilities ensure effective cleaning
• Cleans equipment fast and leaves no residue or oily films
• Non staining & non corrosive
• Non conductive
• Lowers electrical resistance at contact points
• Quickly dislodges oil, grease, silicones, fingerprints, carbon, oxides and other light contaminants from precision electrical / electronic equipment
• Extends wear life of the equipment and reliability of performance
• High dielectric strength
• Prevents intermittent failure of equipment, arcing, tracking, short circuits and corona discharges
• Safe on most plastics, metals, rubbers, insulation materials
• 360° valve allows product to be sprayed in any position - even inverted

Solid lubricant paste with extremely low coefficient of friction for effective running-in and metal assembly

Applications

• As a low friction running-in, metal priming paste for all new or rebuilt mechanical equipment such as gears, sliding bearings, slide ways, joints, sleeves, splines, cams, journal bearings.
• As a press-fitting lubricant to reduce press-fitting power required and prevent misalignment, seizure, wear, distortion especially under heavy load conditions.
• For lubrication of all sliding metal surfaces to reduce wear, friction and prevent cold-welding of surfaces such as for shafts, bushes, splined shafts, pumps, valves, threaded spindles, moving screws, toothed gears, worm gears and transmission gears, lead screws, machine tool guides, pumps, flanges, anti friction bearings, ball and roller bearing...

Solid lubricant paste with extremely low coefficient of friction for effective running-in and metal assembly

Applications

• As a low friction running-in, metal priming paste for all new or rebuilt mechanical equipment such as gears, sliding bearings, slide ways, joints, sleeves, splines, cams, journal bearings.
• As a press-fitting lubricant to reduce press-fitting power required and prevent misalignment, seizure, wear, distortion especially under heavy load conditions.
• For lubrication of all sliding metal surfaces to reduce wear, friction and prevent cold-welding of surfaces such as for shafts, bushes, splined shafts, pumps, valves, threaded spindles, moving screws, toothed gears, worm gears and transmission gears, lead screws, machine tool guides, pumps, flanges, anti friction bearings, ball and roller bearings, shafts, bolts and pulleys.
• As a universal assembly paste to reduce tightening torque required; for enabling easy and non-destructive disassembly of components after long operational hours under operating and temperature variations.
• As an antifriction and anti wear lubricant for heavily loaded surfaces under slow sliding speeds for preventing cold welding of sliding surfaces under heavy loads.
• As a standard anti seize compound for all threaded connections during assembly stage for maintenance free dismantling.

Benefits

• Extremely wide service temperature range of -35°C to +450°C
• Low coefficient of friction
• High pressure withstanding capacity
• Load bearing capacity exceeds the yield point of most metals
• Prevents metal-to-metal contact and offers protection from wear and friction
• Prevents seizure, scoring, galling, fretting corrosion and stick slip
• Reduces press fitting force required and prevents distortion or misalignment
• Makes assembly easier and disassembly rapid and non- destructive irrespective of operational period or conditions
• Economical to use owing to its high surface coverage capacity
• Aids running in and provides emergency lubrication during start ups

Directions for Use
Shake the can vigorously for a couple of minutes before spraying till the bearing noise from inside the container is audible. Repeat before every application. Spray onto a clean, dry and degreased surface. Only a thin film of this lubricant is required. Allow solvents to evaporate. Spray from a distance of 20-30 cms. Repeat if necessary. For cleaning the valve dip- tube after spraying, invert the can and depress the actuator button for a few short bursts till only the clear propellant comes out.

Caution
Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

General
Use in well ventilated areas. Avoid continuous breathing of Vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).

Disposal
All used and unused product should be disposed of in accordance with state regulations.

Handling
Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding personal protective equipment, safe use, physical and health hazards.


Limited Warranty
The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

Molybdenum Disulfide Lubricant For Extreme Pressures

MOLYWET is a suspension of micro fine molybdenum disulfide solid film lubricant, extreme pressure additives and corrosion inhibitors in a special lubricating oil carrier. It deposits a thin, non-drying film of MoS2 onto the surface to form a low friction and wear reducing shield that eliminates metal-to-metal contact and increases wear life of the equipment. MOLYWET does not contain any type of solvents, CFCs or any ozone depleting chemicals.


Benefits

• Very high lubricating effect
• Improves the extreme pressure and load carrying abilities of lubricating oils
• Reduces wear and friction
• Improves running in
• Eliminates frictional heat produced and prevents overheating
• Reduces operating temperatures and noise levels
<...

Molybdenum Disulfide Lubricant For Extreme Pressures

MOLYWET is a suspension of micro fine molybdenum disulfide solid film lubricant, extreme pressure additives and corrosion inhibitors in a special lubricating oil carrier. It deposits a thin, non-drying film of MoS2 onto the surface to form a low friction and wear reducing shield that eliminates metal-to-metal contact and increases wear life of the equipment. MOLYWET does not contain any type of solvents, CFCs or any ozone depleting chemicals.


Benefits

• Very high lubricating effect
• Improves the extreme pressure and load carrying abilities of lubricating oils
• Reduces wear and friction
• Improves running in
• Eliminates frictional heat produced and prevents overheating
• Reduces operating temperatures and noise levels
• Increases relubrication intervals and reduces lubricant consumption
• Prevents galling, scuffing and extends wear life of equipment
• Passes through filters and does not clog them

Applications

• As a high speed, anti wear and anti friction lubricant for sliding parts in textile machinery such as Autoconer mechanisms operating under high speeds and humid
• conditions.
• Lubrication of cams, bearings, gears, pins, chains, sliding or mating parts, springs, cam followers, slides.
• For use as an additive to all types of mineral oils to enhance load bearing capacity and impart extreme pressure carrying abilities for minimising wear and excessive friction, for eliminating metal to metal contact, welding and seizure.

Directions
for Use Shake the can vigorously for a couple of minutes before spraying. Repeat before every application. Spray onto a clean, dry and degreased surface in thin light coats. Spray using extension tube for pin-point application.


Caution
Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

Omnilube is a fast acting industrial grade lubricant, rust Omnilube and corrosion inhibitor. It forms a clear thin non- drying lubricating film that penetrates deep into the minutest crevices to displace trapped moisture and leaves behind a protective film to seal out further moisture and corrosion. Its unique low surface tension formula rapidly attacks rust to free seized or frozen components. It is non-conductive, nonstaining and offers complete protection to metal surfaces indoors as a medium term corrosion inhibitor for protection against corrosion and moisture penetration for up to 12 months under normal storage conditions.Omnilube does not contain any silicones, ozone depleting chemicals, CFC’s or harmful chlorinated solvents and is safe for use on around all metals, plastics, rubbers and other industrial finishes.
   

• Omnilube is a fast acting industrial grade lubricant, rust Omnilube and corrosion inhibitor. It forms a clear thin non- drying lubricating film that penetrates deep into the minutest crevices to displace trapped moisture and leaves behind a protective film to seal out further moisture and corrosion. Its unique low surface tension formula rapidly attacks rust to free seized or frozen components. It is non-conductive, nonstaining and offers complete protection to metal surfaces indoors as a medium term corrosion inhibitor for protection against corrosion and moisture penetration for up to 12 months under normal storage conditions.Omnilube does not contain any silicones, ozone depleting chemicals, CFC’s or harmful chlorinated solvents and is safe for use on around all metals, plastics, rubbers and other industrial finishes.
     
  
  

  • Benefits
  • Multi functional formula lubricates all sliding and moving parts with a long lasting thin oily lubricating film
  • Rapidly penetrates minute cracks and pores to displace trapped moisture
  • Penetrates deeply through rust to loosen scale and corroded or frozen parts
  • Leaves a thin, long lasting film to prevent formation of rust or corrosion
  • Cleans & removes oils, greases and other light contaminants
  • Provides greaseless, non staining, silicone free lubrication and protection
  • Contains safe non flammable CO2 propellant
  • 360° Valve allows product to be sprayed in any position- even inverted

   

  Applications

  • A product as versatile as this has hundreds of multipurpose uses in all types of industrial, marine, aviation, electrical / electronic, electromagnetically, commercial and domestic applications.
  • Lubrication: Thin, non-drying protective oily film effectively lubricates moving parts as tuners, micro switches, power tools, automation equipment, locks,
  • vending machines.
  • Rust Penetration: For rapidly loosening tight, rusted or frozen components with high penetrating action.
  • Moisture Displacement: Rapidly dries wet ignitions & removes trapped moisture from electrical / electronic systems.
  • Corrosion Protection: For dies, jigs, tools, relays, connectors, switches, instruments, finished welds, casings, shafts, motors, freshly machined surfaces.
  • Cleaner: For dissolving and removing grease, oil and other light contaminants.
  • Prevention: Of entry of further moisture.

   

  Directions For Use - Bulk
  Apply by means of brush or by dipping component into the fluid. Allow solvents to penetrate and free rusted parts. Period for penetration may vary depending upon the length of time the product has been rusted for and in some cases may even take up to hours. Use an absorbent rag or a brush to remove dirt, rust, scales & dust. For moisture displacement, apply onto surfaces till only clear product (amber-pale straw) comes out and the emulsified residue is totally cleared. Never use on energized circuits or hot surfaces. Clean and dry surfaces completely before applying power. For metal protection, dip components or apply by brush and do not wipe off protective film from the surface.
  
  
  Directions For Use - Aerosol
  For rust penetration, spray liberally onto the surface. Allow solvents to penetrate and free rusted parts. Period for penetration may vary depending upon the length of time the product has been rusted for and in some cases may even take up to hours. Use an absorbent rag or a brush to remove dirt, rust, scales & dust. For lubrication, spray lightly and evenly over surface area to be lubricated. For moisture displacement, spray until clear product comes out and emulsified residue is totally clear. For metal protection, spray liberally and do not wipe off protective film from the surface.
  
  
  Caution
  Contains flammable solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

Synthetic Lubricant & Cleaner for Precision Textile Equipment

YARNLUBE spray is a non-staining synthetic lubricant cum cleaner for textile machinery parts such as scissors and cutting mechanisms of knotters and splicers in weaving, winding, spinning, sewing and knitting machinery where mechanisms are intricate and delicate and operating speeds are high.

It is useful for cleaning dirt, dust, fluff and provides a non-staining, anti static mild lubricating film for reducing wear and friction.

YARNLUBE spray does not contain any CFCs or harmful ozone depleting substances.


Benefits

• Clear & non-staining ultra thin film
• Cleans moisture, dirt, dust, fluff
• Penetrates metal crevices
• Provides mild lubrication
• Protects from corrosion
• No carbon resid...

Synthetic Lubricant & Cleaner for Precision Textile Equipment

YARNLUBE spray is a non-staining synthetic lubricant cum cleaner for textile machinery parts such as scissors and cutting mechanisms of knotters and splicers in weaving, winding, spinning, sewing and knitting machinery where mechanisms are intricate and delicate and operating speeds are high.

It is useful for cleaning dirt, dust, fluff and provides a non-staining, anti static mild lubricating film for reducing wear and friction.

YARNLUBE spray does not contain any CFCs or harmful ozone depleting substances.


Benefits

• Clear & non-staining ultra thin film
• Cleans moisture, dirt, dust, fluff
• Penetrates metal crevices
• Provides mild lubrication
• Protects from corrosion
• No carbon residues

Directions for Use
Spray evenly thin light coats on clean and dry surfaces. Allow the cleaning solvents to evaporate. Spray from a distance of 20-30 cms. Use extension tube for pinpoint application.


Caution
Flammable contents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.


General
Use in well ventilated areas. Avoid continuous breathing of Vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).


Disposal
All used and unused product should be disposed of in accordance with state regulations.

Handling
Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding personal protective equipment, safe use, physical and health hazards.


Limited Warranty
The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

Cold Galvanizing Coating With Brilliant Shiny Finish To That Of Hot Dip Galvanizing

ZINKOTE is a high performance zinc and aluminium coating designed to provide true galvanic corrosion protection to metals and stop rusting.

It air dries fast on application to leave a film that is highly resistant to heat, water, corrosion and saline environments. It bonds to bare metals without requiring any baking and offers maximum protection against corrosion under severe conditions. It does not contain any chlorinated solvents, CFCs or ozone depleting chemicals


Benefits

• Repairs damaged hot dip galvanised surfaces
• Fast air-drying and offers protection of hot dip Galvanizing
• Brilliant metallic finish to that of hot dip Galvanizing
• Highly abrasion resistant film does not peel off
• Offers long-term...

Cold Galvanizing Coating With Brilliant Shiny Finish To That Of Hot Dip Galvanizing

ZINKOTE is a high performance zinc and aluminium coating designed to provide true galvanic corrosion protection to metals and stop rusting.

It air dries fast on application to leave a film that is highly resistant to heat, water, corrosion and saline environments. It bonds to bare metals without requiring any baking and offers maximum protection against corrosion under severe conditions. It does not contain any chlorinated solvents, CFCs or ozone depleting chemicals


Benefits

• Repairs damaged hot dip galvanised surfaces
• Fast air-drying and offers protection of hot dip Galvanizing
• Brilliant metallic finish to that of hot dip Galvanizing
• Highly abrasion resistant film does not peel off
• Offers long-term protection
• Prevents rust & corrosion

Applications
Structural steels, transmission towers, welding seams, bridges, relay towers, piping & ducting, offshore equipment, nuclear & power plants, antennas, metal fabrication, industrial maintenance, touch up to damaged galvanised coatings.


Directions
For Use Clean and degreased the surface prior to application. Remove all rust and loose scales by wire brush. Shake can well for a couple of minutes till bearing noise from inside the can is audible. Repeat the same before every application. Spray light, even coats with sweeping action of the hand onto completely dry surface. Allow solvents to completely evaporate before re- application. Optimum desired film thickness is about 2-3 mils. Drying time to touch is about 10-15 minutes, to handle is about one hour and for complete cure is about 24 hours. Flush away paint products or product residues in the dip tube of the valve by cleaning it. Cleaning of the valve should be performed after spraying is finished, by inverting the can and pressing the actuator button in short bursts till only the propellant comes out. If required, to prevent clogging, remove the actuator button and clean the button orifice with a thin, fine wire.


Caution
Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.