Anti Seize Assembly Compound

High temperature copper based anti seize thread compound
Solid lubricant paste for all threaded & bolted connections; lead and nickel free

Applications

• Highly recommended for use on all threaded and flanged connections operating at very high temperatures and corrosive conditions to enable faster and rapid non destructive disassembly after long operational periods as in autoclaves, furnaces, boilers, reactors, turbines, extrusion mandrels, compressors, heat exchangers, gas generators, plastic moulding machines, chemical and steel plant equipment.

• Heavy duty thread compound for studs, nuts, bolts, valve stems, spindles, exhaust pipes, cylinder and engine head screws, steam lines exposed to high temperatures, water and corrosives to provide complete protection from seizure and corrosio...

High temperature copper based anti seize thread compound
Solid lubricant paste for all threaded & bolted connections; lead and nickel free

Applications

• Highly recommended for use on all threaded and flanged connections operating at very high temperatures and corrosive conditions to enable faster and rapid non destructive disassembly after long operational periods as in autoclaves, furnaces, boilers, reactors, turbines, extrusion mandrels, compressors, heat exchangers, gas generators, plastic moulding machines, chemical and steel plant equipment.

• Heavy duty thread compound for studs, nuts, bolts, valve stems, spindles, exhaust pipes, cylinder and engine head screws, steam lines exposed to high temperatures, water and corrosives to provide complete protection from seizure and corrosion and which also need to be reopened or re tightened after assembly and initial operational period.

Benefits

• Extremely wide service temperature range of -20°C to +1100°C
• Makes disassembly easy and non-destructive even after long operational periods at high temperatures and adverse working environments
• High load withstanding capacity
• Creates an effective matrix between mating surfaces to prevent metal-to-metal contact
• Protects surface from wear and friction
• Good corrosion protection
• Water resistant
• Ensures consistent tightening of threaded connections and provides an optimum balance between torque required to tighten and pretension
• Prevents bolt breaking, sintering, fusion, seizure, thread striping and distortion of threads
• Meets requirements of MIL-A-907E

Directions for Use
Shake the can vigorously for a couple of minutes before spraying till the bearing noise from inside the container is audible. Repeat before every application. Spray onto a clean, dry and degreased surface. Only a thin film of this lubricant is required. Allow solvents to evaporate. Spray from a distance of 20-30 cms. Repeat if necessary. For cleaning the valve dip- tube after spraying, invert the can and depress the actuator button for a few short bursts till only the clear propellant comes out.


Caution:- Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.


General
Use in well ventilated areas. Avoid continuous breathing of Vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).


Disposal
All used and unused product should be disposed of in accordance with state regulations.


Handling
Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding personal protective equipment, safe use, physical and health hazards.


Limited Warranty
The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

Solid lubricant paste for effective running in, assembly, press fitting and anti seize applications

Benefits

• Extremely wide service temperature range of -25°C to +450°C (up to +630°C in areas with restricted air access)
• Low coefficient of friction
• High pressure withstanding capacity
• Load bearing capacity exceeds the yield point of most metals
• Offers protection from wear and friction
• Eliminates metal-to-metal contact
• Prevents seizure, scoring, galling, fretting corrosion and stick slip
• Makes disassembly easier and non-destructive irrespective of operational period or conditions
• Economical to use owing to its high surface coverage capacity
• Aids running in and provides emergency lubrication during start ups
• Prevents cold welding a...

Solid lubricant paste for effective running in, assembly, press fitting and anti seize applications

Benefits

• Extremely wide service temperature range of -25°C to +450°C (up to +630°C in areas with restricted air access)
• Low coefficient of friction
• High pressure withstanding capacity
• Load bearing capacity exceeds the yield point of most metals
• Offers protection from wear and friction
• Eliminates metal-to-metal contact
• Prevents seizure, scoring, galling, fretting corrosion and stick slip
• Makes disassembly easier and non-destructive irrespective of operational period or conditions
• Economical to use owing to its high surface coverage capacity
• Aids running in and provides emergency lubrication during start ups
• Prevents cold welding and stick slip
• Good affinity for metal surfaces

Applications

• As a running-in, metal priming paste for all new or rebuilt mechanical equipment such as journal bearings, gear boxes, splines.
• As a press-fitting lubricant to reduce press-fitting power required and prevent misalignment, seizure, wear, distortion especially under heavy load conditions.
• For lubrication of all sliding metal surfaces to reducewear, friction and prevent cold-welding of surfaces such as for shafts, bushes, splines shafts, pumps,
• valves, threaded spindles, toothed gears, worm gears and transmission gears, lead screws, machine tool guides, pumps, flanges, anti friction bearings.
• As a metal working lubricant to prevent galling, seizure, welding and metal pick up on tools and dies in deep drawing, machining, punching, stamping, thread rolling,
• cold heading, waging and forging.
• As a universal assembly paste to reduce tightening torque required; for enabling easy and non-destructive disassembly of components after long operational hours under operating and temperature variations.
• As an antifriction and anti wear lubricant for heavily loaded surfaces under slow sliding speeds for preventing cold welding of sliding surfaces under heavy loads.
• As a standard anti seize compound for all threaded connections during assembly stage for maintenance free dismantling.

Method of Application
Clean the sliding surfaces and friction points. Apply this paste with a brush or cloth and rub intensively on the metal surface to form a thin uniform film. Do not use in excess as is customary with greases. Do not mix with other oils or grease.

Copper and solid lubricants paste for all nuts, bolts, screws, threaded connections; lead and nickel free

Applications
Anti seize, anti rust & effective lubricant for protection of parts operating under severe corrosion, temperatures and steam, humidity, water or chemical attack as: studs, nuts, bolts, screws, pipes, keys, u-bolts, splines, taps, slides, seals, slippers, joints, plugs, gears, chains, exhausts sprockets, valve stems, manifolds, couplings, adapters, bearings, gaskets, packings, drills, bushings, king pins, spindles. For use on all threaded and flanged connections operating at very high temperatures to prevent seizure, corrosion and atmospheric influences as in: cat crackers, autoclaves, cylinder heads, furnace bolts, generators, fuel feed nozzles, boilers, reactors, ladles in steel plant, turbines, burners, extrusion...

Copper and solid lubricants paste for all nuts, bolts, screws, threaded connections; lead and nickel free

Applications
Anti seize, anti rust & effective lubricant for protection of parts operating under severe corrosion, temperatures and steam, humidity, water or chemical attack as: studs, nuts, bolts, screws, pipes, keys, u-bolts, splines, taps, slides, seals, slippers, joints, plugs, gears, chains, exhausts sprockets, valve stems, manifolds, couplings, adapters, bearings, gaskets, packings, drills, bushings, king pins, spindles. For use on all threaded and flanged connections operating at very high temperatures to prevent seizure, corrosion and atmospheric influences as in: cat crackers, autoclaves, cylinder heads, furnace bolts, generators, fuel feed nozzles, boilers, reactors, ladles in steel plant, turbines, burners, extrusion mandrels, ovens, soot blowers, blast furnaces, pumps, engines, steel plant equipment, compressors, heat exchangers.

For use in oil rigs, refineries, petrochemical, chemical & fertiliser plants as a heavy duty thread assembly compound, pipe sealant and anti corrosion compound for components exposed to very high temperatures, steam, hot, cold, brine water, humidity, corrosive or chemical environments to provide protection, effective lubrication, sealing and corrosion protection and prevent seizure, jamming and rusting even after long operational hours under very severe conditions.

For use in rotary kilns in cement plants as a high temperature, extreme pressure, low friction lubricant for effective lubrication of live ring supports.


Benefits

• Extremely wide service temperature range from -18°C to +1100°C.
• Eliminates metal-to-metal contact and maintains lubrication qualities under wide variations of temperature, pressures and adverse operating conditions.
• Prevents fretting, galling, tightening, welding of mating surfaces.
• Protects against galvanic corrosion between dissimilar metals in contact.
• Enables faster and rapid assembly and non-destructive disassembly even after long term exposure to high temperatures and corrosive atmospheres.
• Prevents stripping and cold-welding of threads and avoids sintering, fusion, thread stripping, bolt breaking and distortion.
• Low friction properties reduce wear and friction to increase life of the equipment and avoid costly replacements.
• Highly resistant to hot and cold water, steam, humidity, brine water, mild acids and alkalis, corrosion, aging and oxidation.

Methods of Application
Clean and degrease the surface prior to application. Remove all coatings, greases, dirt, grime, loose rust and scales by means of a fine thin wire. Apply METAPLAT liberally by means of a stiff wire brush on to the surface and evenly right down to the roots of threads. Excessive compound provides a good sealing effect and need not be removed. Do not mix with conventional oils and greases.

Note METAPLAT is not for use as a lubricant for high-speed bearings. However it may be used for lubrication of heavily loaded bearings under very slow speeds.

Nickel based high temperature anti seize compound meeting purity levels for nuclear power plant equipment

Applications

• Primary applications for JETEX NS-369 is in Nuclear PoPwer lants, Steel Plants, Petrochemical & Fertilizer Units, Refineries for providing high temperature, extreme pressure, anti seize and anti corrosion lubrication for equipment as burner tips, furnace hinges, reactor bolts, studs, pipe fittings, threaded connections, flanges, pump fittings, unions.
• It can be used as a heavy duty anti seize thread compound for all high strength alloys, nickel alloys and stainless steel hardware or fittings to provide effective lubrication at high temperatures and prevent seizure.
• It can be safely used in the presence of ammonia, acetylene or vinyl monomers that are unstable in the presence of copper.

  Nickel based high temperature anti seize compound meeting purity levels for nuclear power plant equipment
  
  Applications

  • Primary applications for JETEX NS-369 is in Nuclear PoPwer lants, Steel Plants, Petrochemical & Fertilizer Units, Refineries for providing high temperature, extreme pressure, anti seize and anti corrosion lubrication for equipment as burner tips, furnace hinges, reactor bolts, studs, pipe fittings, threaded connections, flanges, pump fittings, unions.
  • It can be used as a heavy duty anti seize thread compound for all high strength alloys, nickel alloys and stainless steel hardware or fittings to provide effective lubrication at high temperatures and prevent seizure.
  • It can be safely used in the presence of ammonia, acetylene or vinyl monomers that are unstable in the presence of copper.

  
  
  Benefits

  • Extremely wide service temperature range from -30°C to +1427°C.
  • Eliminates metal to metal contact and maintains lubrication qualities under wide variations of temperature and adverse operating conditions and prevents galling, hardening, fretting, seizure, stripping, cold-welding, sintering, fusion of threads, bolt breaking and distortion
  • Enables faster and rapid assembly and non-destructiv disassembly even after long term exposure to high temperatures and corrosive atmospheres
  • Does not contain any ingredients that may poison reactor catalyst beds such as copper, lead, sulfurs, chlorides, halogens, silicones
  • Highly resistant to hot & cold water, brine water, steam, humidity, moisture, dilute acids and alkalis, rust, corrosion and oxidation
  • Safe to be used in the presence of ammonia, acetylene and vinyl monomers which are highly unstable in the presence of copper Low friction properties reduce wear and friction to increase life of the equipment
  • Chemically inert and does not react with metals to cause pitting, and prevents intergranular or electrolytic corrosion of high strength ferrous or non-ferrous materials
  • Extremely recommended for use on all high strength alloys, stainless steel and nickel alloys
  • Meets purity levels for use in nuclear class hardware

  
  
  Method of Application
  Clean and degrease the surface prior to application. Remove all coatings, greases, dirt, grime, loose rust and scales by means of a fine thin wire. Apply Nikkel Lube liberally by means of a stiff wire brush on to the surface and evenly right down to the roots of threads. Excessive compound provides a good sealing effect and need not be removed. Do not mix with conventional oils and greases.

Stiff, non melting silicone grease compound for use as a valve lubricant and sealant

Applications

• Lubricant for O-rings, packings, rubbers, gaskets, miniature bearing seals to provide resistance to water, chemicals, oxidation and provide thermal stability
• Lubrication of pneumatic control valves, fire extinguishers and water softener valves
• Sealant and lubricant for glass joints and stopcocks in normal as well as high vacuum systems
• Lubricant for pressure lubricated plug valves, flow meter bearings, ceramic plug cocks
• Sealant for vacuum and pressure systems
• Sealant between synthetic rubber or plastic parts to prevent them from sticking to in vacuum or pressure systems
• Chemical barrier and resistant coating for chemical processing equipment
• Damping media for dash pots...

Stiff, non melting silicone grease compound for use as a valve lubricant and sealant

Applications

• Lubricant for O-rings, packings, rubbers, gaskets, miniature bearing seals to provide resistance to water, chemicals, oxidation and provide thermal stability
• Lubrication of pneumatic control valves, fire extinguishers and water softener valves
• Sealant and lubricant for glass joints and stopcocks in normal as well as high vacuum systems
• Lubricant for pressure lubricated plug valves, flow meter bearings, ceramic plug cocks
• Sealant for vacuum and pressure systems
• Sealant between synthetic rubber or plastic parts to prevent them from sticking to in vacuum or pressure systems
• Chemical barrier and resistant coating for chemical processing equipment
• Damping media for dash pots in electrical and electronic equipment
• Assembly agent for holding rubbers and other parts due to its highly tacky nature
• All ingredients comply with regulations for food grade materials

Benefits

• Wide service temperature range from -40°C to + 200°C Very good oxidation resistance
• Completely resistant to water, steam, humidity and corrosives
• Low Vapor pressure and low volatility
• Compatible with plastics, rubbers, elastomers, and other gasketing and O-ring seal materials
• Prevents age hardening, stress cracking and maintains resilience of plastics
• Non gumming, non melting and non toxic
• Provides good lubricating and sealing properties for rubbers and plastics
• Chemically inert and resistant to most chemicals, hot and cold water, vegetable and mineral oils, dilute acids and alkalis, glycerin, ethanol, methanol, butane, steam, natural gas, ethylene glycol, most organic and inorganic chemicals and aqueous solutions.

Methods of Application
Apply by means of hand, brush or putty knife. Can also be dispersed in solvents like mineral spirits, xylene or methyl ethyl ketone for thinning the consistency and making it easier to apply by brushing, dipping or spraying. Do not mix with other oils or grease.

Dielectric, non-melting silicone grease like compound for electrical parts insulation and moisture protection

Applications

• As a moisture proof seal and protective barrier coating on high tension electrical connections of all electronic, electrical, industrial, marine, aircraft, automotive equipment for providing greater resistance to tracking and effects of corona discharges
• As a dielectric seal cum lubricant for switches, cables, cable connectors, high voltage insulators, battery terminals, plastic and rubber parts, bushings, electrical insulation, spark plugs, disconnection junctions, ignition systems to prevent formation of a conducting film of water, eliminate risk of flash overs, minimise electrical leakage and prevent ingress of moisture
• For all electrical fittings exposed to marine environments to prote...

Dielectric, non-melting silicone grease like compound for electrical parts insulation and moisture protection

Applications

• As a moisture proof seal and protective barrier coating on high tension electrical connections of all electronic, electrical, industrial, marine, aircraft, automotive equipment for providing greater resistance to tracking and effects of corona discharges
• As a dielectric seal cum lubricant for switches, cables, cable connectors, high voltage insulators, battery terminals, plastic and rubber parts, bushings, electrical insulation, spark plugs, disconnection junctions, ignition systems to prevent formation of a conducting film of water, eliminate risk of flash overs, minimise electrical leakage and prevent ingress of moisture
• For all electrical fittings exposed to marine environments to protect from salt-water corrosion, oxidation, moisture penetration, reduce maintenance and increase wear life of equipment As a protective coating on insulators and bushings in chemical plants to protect them from chemical fumes, vapours and gases
• As an assembly lubricant for various metal-plastic and metal- rubber pairings
• On to surfaces of ceramics, metals, insulating materials to impart high surface resistivity

Benefits

• Wide service temperature range from -50°C to + 200°C
• Moisture resistant and excellent water repellency qualities prevent formation of conducting water film
• High degree of resistance to salt spray, humidity and corrosives
• High dielectric strength
• Chemically inert
• Very low volatility
• Very good thermal and oxidation stability
• Consistency is largely independent of temperature and maintains its grease like consistency at high temperatures
• Nontoxic, non volatile, non melting and odourless
• Compatible with plastic, rubber and metal pairings
• Very good adhesion on all metals, glass, plastic, ceramic, rubber substrates

Method of Application
Apply by means of hand, brush or putty knife. Can also be dispersed in solvents like mineral spirits, xylene or methyl ethyl ketone for thinning the consistency and making it easier to apply by brushing, dipping or spraying. Do not mix with other oils or grease.


Directions For Use (Aerosol only)
Shut off equipment and turn off power before spraying. Spray thin, light and even coats onto clean, dry and moisture free surfaces to a thickness of about 0.4-0.5 mm. For optimum use, clean surface dry from moisture. Allow few minutes for solvent to completely evaporate before resuming operations. Removal of the film can be done by normal degreasing solvents.


Caution (Aerosol only) Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

Silicone grease like compound for use as a release and separating agent

Applications

• Release agent for epoxy, polystyrene, PVC, polyesters and other plastics
• Release agent on polished dies for vinyl sheet embossing to improve surface finish of vinyl processed materials
• Release agent for plastic extruders and processing equipment
• Break in treatment for bladders on tyre presses
• Mould release agent for foundry shell and core molds
• Rubber lubricant and preservative to maintain its resilience to age hardening and stress cracking
• Release agent for adhesives and glues in plywood and board manufacturing industry for acting as an anti stick agent and preventing contact and adhesion of adhesive
• glues to machine components
• In metal casting applications during shell mo...

Silicone grease like compound for use as a release and separating agent

Applications

• Release agent for epoxy, polystyrene, PVC, polyesters and other plastics
• Release agent on polished dies for vinyl sheet embossing to improve surface finish of vinyl processed materials
• Release agent for plastic extruders and processing equipment
• Break in treatment for bladders on tyre presses
• Mould release agent for foundry shell and core molds
• Rubber lubricant and preservative to maintain its resilience to age hardening and stress cracking
• Release agent for adhesives and glues in plywood and board manufacturing industry for acting as an anti stick agent and preventing contact and adhesion of adhesive
• glues to machine components
• In metal casting applications during shell molding process for breaking in new casts, zinc molding plates smoother operations, lesser rejection, increasing life of the dies, improving surface finish and outlook of components and chill casting of brass

Benefits

• Wide service temperature range from -40°C to +204°C
• Very low volatility
• Very good thermal and oxidation stability and minimises build up on mold
• Nontoxic, non melting and odourless
• Chemically inert and does not react with plastics and metals
• Suitable for high temperature moulding operations
• Excellent release properties increases production output while minimising rejection
• Resistant to water
• Does not dry out

Method of Application
Apply by means of hand, brush or putty knife. Can also be dispersed in solvents like mineral spirits, xylene or methyl ethyl ketone for thinning the consistency and making it easier to apply by brushing, dipping or spraying. Do not mix with other oils or grease.